8
S
af
et
y P
recautions/Not
es on w
at
er and dust r
esist
ance
Use the K012 in temperatures between 5°C and 35°C (limited use
between 36°C and 40°C) and humidity between 35% and 90%.
Repairs are not covered by warranty if malfunction is deemed to be
due to use in extremely hot or cold conditions exceeding these
ranges.
Remove the protective sheet from display before use. Use with the
protective sheet applied may cause injury. Be careful not to cut your
fingers, etc. when removing.
Do not forcefully remove an inserted microSD memory card. Doing so
might result in malfunction or loss of stored data.
Use only specified microSD memory cards. Failure to do so may result
in malfunction or loss of stored data. For details on au-specified items,
contact an au shop or the Customer Service Center.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition. See the
following table.
The materials of parts used in the K012 are as follows.
Location
Material
Finish
Outer case (LCD front case, key
front case, key rear case), battery
cover
PA + GF
resin
UV cured acrylic coating
Outer case (LCD rear case)
Hinge cover (L/R)
PC + GF
resin
UV cured acrylic coating
External connection terminal cover
PC resin +
TPE resin
UV cured acrylic coating
Infrared port window
PC resin
-
Speaker plate, Address book key,
Camera key, OK key, Mail key,
EZ key, Answer key,
Clear/Memo key, End key,
Number keys, Voice read key,
Plus key, Minus key,
＊
key,
＃
key,
Up key, Left/Incoming history key,
Right/Outgoing history key,
Down/Appli key, One touch key
PC resin
UV cured acrylic coating
Key plate
PET resin
-
Power switch
PC/ABS resin
-
Lock switch
POM resin
-
Window panel (main)
PC resin
Acrylic coating
Chemical hardening
Camera plate
Acrylic resin
Chemical hardening
Window panel (sub)
Incoming (charging) indicator
window
Acrylic resin
PET film finish
Cushion (under number keys)
PU resin
-
Charging terminals
Phosphor
bronze
Gold plating (base layer:
nickel)
