- 16 -
Cautions on Using 5 GHz Band
Outdoor use of 5.2 GHz band and 5.3 GHz band (W52/W53) is prohibited under the Radio
Law.
Excludes communication with the base stations or land mobile relay stations of high-output
data communications systems operating in the 5.2 GHz band.
The used channels of the product are as follows.
• W52 (5.2 GHz band / 36, 40, 44, 48 ch)
• W53 (5.3 GHz band / 52, 56, 60, 64 ch)
• W56 (5.6 GHz band / 100,104,108,112,116,120,124,128,132,136,140,144 ch)
Security Code/PIN Code
Security Code
The product has various security codes that you can use. The available security codes are as
follows. Do not forget the various security codes that are set as they are necessary for
various operations and contracts. Be sure to change the initially set number to your own
number.
■
Security code
Example of
usage
To do various inquiries, applications, and modifications on the au homepage
Initial value A four digit number chosen by the customer and noted on the application
form
PIN Code
■
PIN Code
To prevent unauthorized use of the au IC card by a third party, you can set the product to
require PIN code entry every time the power is turned on. You also need to enter PIN code
when setting whether PIN code entry is required.
If PIN code is incorrectly entered three times consecutively, the PIN code will be locked. You
can unlock the PIN code using PUK code.
• At the time of purchase, the PIN code is "1234", and entry is not required. You can change
the PIN code to any 4- to 8-digit number and the product to require entry if necessary.
• To use the product with a PIN code required, be sure to change the PIN code to your own
number you have chosen.
■
PUK Code
In case PIN code is locked, you can unlock it by entering PUK code.
• PUK code is an 8-digit number given at the time of purchase, which is printed on the back
side of the plastic card on which your au IC card is attached.
• After entering PUK code, you need to set a new PIN code.
• If PUK code is incorrectly entered ten times consecutively, contact an au shop/au Style,
Toyota store dealing in au, or Customer Center.
• PIN code is not reset by initializing the product.
Notes on Data Communication Charges
• Since constant Internet connection is possible with the product, data communication may
be performed automatically by some applications, resulting in high data communication
charges. Therefore, subscription to a data flat-rate service/data communication charge
discount service is recommended.
• To browse homepages, download applications, communicate using applications, send/
receive mails and configure various settings with the product, connection to the Internet is
required, to which data communication charge applies.
* Data communication charge does not apply if connected by wireless LAN (Wi-Fi®).
Notes on Applications
• Be sure to check the security of the application, then install it at your own risk. Some
applications might adversely affect other applications or entire the product. They may cause
virus infection, damage various data, and send out your location information, usage history
or personal information stored in the product via the Internet.
• The Company assumes no responsibility for any problems that might be caused by
applications you have installed. In such case, you may be charged a repair fee even during
the warranty period.
• The Company assumes no responsibility for any disadvantage brought to you or any third
party by applications you have installed.
• Some applications require that a microSD memory card be inserted.
• Some applications prohibit the product from entering sleep mode while they are active, or
rapidly drain the battery while running in the background.
• Operation procedures and screen appearances of the applications preinstalled in the
product and those installed by you are subject to change without notice as a result of
version upgrade. Note that there may be differences with descriptions in this manual.
Summary of Contents for DIGNO Tab
Page 23: ...22...
