pg. 3
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time
.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ VGA-EM100IR-RX
Description: HDMI4K/VGA over IP Receiver with IR, RS-232, PoE/ LAN &
USB/KVM Extension
SYSTEM REQUIREMENTS:
•
HDMI or VGA source equipment such as media players, video
game consoles, PCs or set-top boxes.
•
HDMI or VGA receiving equipment such as HDTVs, monitors or audio
•
Analog audio receiving equipment such as headphones, audio
amplifiers or powered speakers.
•
A Gigabit Ethernet network switch with jumbo frame support is required.
(8K jumbo frames are strongly recommended.)
•
A Gigabit Ethernet switch with “IGMP snooping” enabled is required for multicast
support.
FEATURES:
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 & 2.2 compliant
• 1×HDMI input, 1×VGA input & 1×VGA bypass output
• Video, audio and control transmission over TCP/IP in Unicast (point- to-point) or
Multicast (single-to-many) modes
• Multi-monitor video wall support with 90° rotation
• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz
(YUV 4:4:4, 8-bit)
Note: 4K@50/60Hz (YUV 4:2:0) sources are automatically converted to 4K@25/30Hz
(RGB) for output
• VGA input and output resolutions up to WUXGA (RB)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
and Bitstream over HDMI
Note: The optical output on Receivers can only support LPCM 2.0 & Bitstream sources.
•
The analog Line In on the Transmitter sends audio directly to the analog Line Out
and is inserted into the HDMI output on connected Receivers
•
The Mic In on the Receiver sends audio directly to the analog Line
Out on the Transmitter