pg. 7
Notes
:
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model :
ATZ HDMI-V2-44P
Description:
4x4 HDMI2.0 Matrix Switch 18Gbps 4K@60Hz 4:4:4 w/Audio Extractor/
RS232+Web GUI
1.
Status
– Display information about the firmware and IP setting.
2.
Video
– Switch the desired input source to output and set the preset.
3.
Input
– Display information about the input signal and EDID setting.
4.
Output
– Display information about the output signal and scaler option.
5.
Network
– Allow basic network setting management and login options.
6.
System
– Panel lock, beep, serial baudrate setting and firmware update.
Note these six pages are only accessible in Admin mode, when User mode
is used only the Status and Video pages are available.
To access the Web interface, enter the IP address of the switcher into the
address bar of any web brower. The default IP address is
192.168.1.100.
Please see the following operation method.
Note that if the IP address of the switcher is not know, use the RS-232 Command
given in the Network Setting section
“r ip addr!”
to discover the current IP address
or set the switcher to factory default status and IP address restores to default
192.168.1.100.
Step 1:
The TCP/IP port on the rear panel is directly connected a PC with an UTP
cable.
Step 2:
Set your PC IP address to the same network segment with Switcher,
for instance set PC IP address to 192.168.1.200 and Subnet mask to 255.255.255.0.
