pg. 4
Notes
:
- All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered
from time to time.
All specifications are subject to change without prior notice.
© Copyright ATZ
Model :
ATZ HDMI-V2-44HE150
Description:
4x4 Matrix Switch over HDBaseT™ w/8x HDBaseT Receiver Box
150m 18Gbps 4K2K@60Hz 4:4:4
Operation Controls and Functions
Matrix Panel
Front Panel:
NO.
Name
Function Description
1
OLED screen
Display matrix switching status, input / output port, EDID,
Baud rate, IP Address.
2
Power LED
The LED will illuminate in green when the product is working normally,
and red when the product is on standby.
3
OUTPUT /
INPUT buttons
You need to press an output button (1~4) firstly and then
press an input button (1~4) to select the corresponding input
source for the output port.
4
MENU /
ENTER
/ UP /DOWN
①
EDID setting:
On the initial OLED display screen, press
“MENU” button to enter “Select EDID” interface, press
“UP/DOWN” button to select the required EDID, and press the
“ENTER” button to enter “Copy to Input:” interface. Then press
“UP/DOWN” button to select the input port you need to set, and
press “ENTER” button again to confirm.
②
Baud rate setting:
On the initial OLED display screen, press
“MENU” button twice to enter “SELECT BAUD” interface,
and press “UP/DOWN” button to select the required Baud rate,
finally press the “ENTER” button to confirm the setting.
③
IP Address Check:
On the initial OLED display screen,
press “MENU” button three times to enter the IP interface
and check the current IP address, then press “UP/DOWN” button
to switch DHCP ON/OFF, finally press the “ENTER” button to
confirm the setting.
Pressing the “MENU” button again will return to the initial OLED