pg. 7 All specifications are subject to change without prior notice.
© Copyright ATZ 2013
Model : ATZ HDMI-884IA
Description:
8x8 (4Kx2K) HDCP2.2 HDMI Matrix with EDID c Remote control
+ IR + Coaxial
5.2 Rear Panel
1.
PC CONTROL
：
Show the status of input-output selection, EDID info and so on.
TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45
terminated cable.
RS232: Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232
commands.
2.
Power port
：
Use included DC adaptor to power the matrix switcher.
3.
IR EXT: This port is local IR receiver for extending the IR signal. Connect with Wideband IR Rx.
4.
IR RECEIVER: These ports are IR Matrix input ports. Connect with Wideband IR Rx.
5.
IR TRANSMITTER: These ports are IR Matrix output ports. Connect with Wideband IR Tx.
6.
COAXIAL OUTPUT: Audio output area, each ports are come from HDMI output port. For example:
the audio signal of coaxial out A is come from HDMI output A.
7.
HDMI INPUT Area
：
Connect HDMI sources. LED 1-8 illuminate when the HDMI signal plug in
corresponding input port with HDMI cable.
8.
HDMI OUTPUT Area
：
Output for displays, AVR etc. LED A-H illuminate when the displays plug in
corresponding output port with HDMI cable.
