pg. 9
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time
.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ VGA-EM100IR-TX
Description: HDMI4K/VGA over IP Transmitter with IR, RS-232, PoE/ LAN &
USB/KVM Extension
the source is not using dithering, please leave this feature disabled as it may cause a
blocking effect with non-dithered content.
Note: This feature is set to “off” by default.
(10) ISP: For factory use only.
(11) RESET: Press this recessed button to reboot the unit (Settings will not be reset).
(12) VGA LOOPBACK OUT: Connect to an analog VGA monitor to locally view the
connected VGA or HDMI (non-HDCP, 1080p or lower) source.
Transmitter's Rear Panel
(1) DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power. (Optional if powered by PoE)
(2) USB: Connect directly to a PC to extend its USB functionality to the
ports on the connected Receiver.
(3) LAN (PoE): Connect via a Gigabit Ethernet switch to compatible Receiver(s) to
transmit data, and to a PC/laptop to control the unit via WebGUI.
Note: This unit can be powered directly by the connected Gigabit Ethernet switch if it
provides PoE (802.3af).
(4) VGA IN: Connect to VGA source equipment such as a PC or laptop.
Note: PC text and content with fine details may display with some
visual artifacts when transmitted at 4K@60Hz (YUV 4:2:0).
(5) HDMI IN: Connect to HDMI source equipment such as a media
1
2