CHAPTER 2: GENERAL (GLOBAL) CONFIGURATION
2-6
VersAtive
®
Pro Enhanced – Operation Manual
2.8 SNMP
The Device may be configured to sent SNMP traps to a remote SNMP manager. At this time the Device supports SNMPv2c.
The Port default is
162
which is the well known port for SNMP and trap community is
Public
, both of which may be changed.
2.8.1 Add SNMP Remote Manager
Multiple SNMP managers may be added to receive traps.
1. Clickthe
General
Icon at top of Tree View to select it, Figure 2-15.
2. Click the
SNMP
tab.
3.
Enter the
IP Address
of the remote SNMP manager.
4. Click
Add IP
button to add this IP address to the list.
5. Click
Save
to apply the changes.
•
Repeat to add more SNMP Managers.
2.8.2 Download and Compile the MIB
The MIB will need to be compiled to the SNMP Manager and it is stored locally on the Device hard drive. It may be obtained
from the link on the SNMP tab.
Procedure
This procedure explains how to access the Device MIBs and extract them to the SNMP Manager.
1. Click the
General
Icon at top of Tree View to select it, Figure 2-16.
2. Click the
SNMP
tab.
3. Click the link
Download MIBs
.
4. Open the downloaded zip file with any zip file client.
5. Extract the two .txt files and compile the files into the SNMP Manager.
1
2
3
4
5
Figure 2-15: Add SNMP Manager
1
2
3
Figure 2-16: Download MIB
