CHAPTER 2: GENERAL (GLOBAL) CONFIGURATION
2-4
VersAtive
®
Pro Enhanced – Operation Manual
2.5 System Time
System time is set by default to be set manually but it may also be set to be automatically updated by a defined NTP server if
the VersAtive Device has access to either a local server or internet NTP servers.
2.5.1 Change Time Zone & NTP Server
The Time and Date are set manually by factory default and assumes that Internet access is not available. Use of an NTP
server assumes that the VersAtivePro has access to DNS servers and Internet.
1. Click
General
Icon at top of Tree View, Figure 2-10.
2. Click the
System Time
tab.
3. Select the Button
‘Set Time from NTP server’
.
4.
Enter the
IP Address
or
URL
of the desired NTP server.
5. Select the appropriate
Time Zone
from the dropdown menu.
6. Click the
Apply
button.
2.6 User Management
A single user with Administrator authority is defined by default but users may be added or managed as required.
2.6.1 VMS Authentication
This is the only authentication type and relies on a username and password for security.
Add User
1. Click the
General
Icon at top of Tree View to select it, Figure 2-11.
2. Click the
User Management
tab.
3. Click
New
.
1
2
3
4
5
6
Figure 2-10:
NTP Time Server Configuration
1
2
3
Figure 2-11: Add New User
