Chapter 2
19
JP3/4 (Power On by USB 0/1/2/3, 4/5/6/7):
JP3 -> USB 0/1/2/3, JP4 -> USB 4/5/6/7
An USB keyboard hot key or an USB
mouse-click can activate this board. To
use this function, select a hot key of your
choice at the USB Resume from S3 option under Wake
Up Events in the BIOS's Power On Management
screen.
CN7 / 8 (USB Connector for USB 6/7 and 4/5):
USB Port 4/5
à
CN7, USB Port 6/7
à
CN8
If you want to use a USB Keyboard, you must enable the USB
keyboard support function in BIOS's Integrated Peripherals menu
(See Section 3.4). This board contains a USB Host controller and a
root hub with two connectors is also included for an optional USB
Adaptor (USB 6/7 and 4/5).
CN19 (Front Audio Connector):
This connector gives you the option of a front-panel audio-jack
cable ext. to be plugged into a special custom-designed system
case.
U8 / U9 Serial ATA Connectors (7-pin SATA1/2)
The motherboard provides 2 SATA connectors, which can be used to
connect the SATA IDE hard disk drive (HDD) cables for HDD
devices. RAID 0 and RAID 1 are supported. For more detailed
information, please refer to Appendix.
Pin
JP3
JP4
1-2
(default)
Enable Disable
2-3
Disable Enable
