CHAPTER 5: CHANNELS TAB
5-10
MDU Solutions
®
– UCrypt
®
IP to Analog 2
nd
Generation – Installation & Operation Manual
3. Click
Swap
4. The backup feed name is now in the list of channels and the main channel URL has shifted to the left column but the
swap is not yet active as the publish button announces
1 Change is waiting to be published
5. Click the
Publish
button.
The backup stream is now the main stream for this channel and will stay the main stream due to the choice of ‘
stay on
secondary
’. See the new feed in the
Name
column. The stream that was formerly the main stream is now not in use and must
be manually switched back if desired.
5.10 Setup the Output Analog Channels
The UCrypt Device comes pre-configured with all channels defined but any channel may be re-assigned easily by typing in the
new channel number. Duplicates are not allowed so first delete any channels to be moved to avoid duplication.
1. Click the
Channels
tab if it is not already selected, Figure 5-23.
2. The channel assignments within the chosen plan are pre-defined in text boxes which are both dropdown menus of
available choices and searchable by typing a number.
3. Clicking the box presents the current assignment highlighted and allows other choices. Typing any number will
activate the search menu which lists all candidates that meet the criteria both in frequency and channel number.
3
Figure 5-21: Click Swap
4
5
Figure 5-22: Backup Stream is Now Primary
1
2
3
Figure 5-23: Set Analog Output Channel
