Motion Sensing DALI configuration
Unique to this device are the DALI memory bank 0 contents. They are read / writable
On Time
16
Seconds of On Time renewed each time moment motion is detected
The 8 bit value is multiplied by 30 for the number of seconds
Maintain
Sensitivity
17
Sensitivity for keep alive. Typically 10 to 15 should be used. Higher values are less
sensitive. If no motion in at this sensitivity is detected, the light will turn off
automatically in either vacancy or occupancy mode
Detect
Sensitivity
18
Sensitivity for new motion. Typically 40 to 80 should be used, higher values are less
sensitive. In occupancy mode, this level will cause the light to turn on
Brightness
19
Night-Light Brightness
a value from 0 ( off ) to 255 ( full power )
Harvesting
20
if there is ample light in the room
– the motion sensor will not turn on the LED lighting
– the ceiling light can be dimmed to this level
255 = always turn on the LED lighting
Fade Out
21
this is the number of seconds it will take to fully turn the light off
when no motion is detected
Dark Level
22
Night-light Threshold
The Ambient light setting that will turn the night-light off
if the light exceeds this value
NightLight
23
mode
value
Onboard Light Ceiling Light
DALI bus
Off
0
Off
No update
No update
Built In
1
Active
No update
No update
Overhead
2
Off
Active
Update
Both
3
Low level
Active
Update
Motion
24
mode
Value
On Rule
Off Rule
Brightness
Occupancy
0
Auto
Auto
Memory
Vacancy
1
Manual
Auto
Memory
Manual
2
Manual
Manual
Memory
Occupancy Harvest
3
Auto
Auto
Automatic
Vacancy Harvest
4
Manual
Auto
Automatic
Manual Harvest
5
Manual
Manual
Automatic
