WIRING INSTRUCTIONS:------------- MODEL KVNG-2009
-------------------------------------------------
Note:
ATWEC TECHNOLOGIES, INC. IS NOT RESPONSIBLE FOR ACCURACY OF APPLICATION OR
INSTALLATION. PLEASE VERIFY ALL WIRING FUNCTIONS AND CONNECTIONS BEFORE
OPERATION OF VEHICLE. PLEASE CHECK ALL MANUFACTURER’S CAUTIONS
CONCERNING AIR BAGS, ABS SYSTEMS, ETC
(+) 12VDC
GROUND
IGNITION
VS= Voice
Speaker
Connections
G O P B R
BLACK
RED
PURPLE
ORANGE
BLK
RED
RESET SWITCH
IGNITION HARNESS
GREEN
SIREN
R
B
WIRING INSTRUCTIONS:---(Continued)------------------------------------------
5 WIRE CABLE:
RED:
MAIN POWER CONNECTION (Connect to the (+) 12V
battery terminal, or ignition harness.
BLACK:
GROUND (Connect this wire to chassis ground.) It is of ut-
most importance that the location of this connection be as clean as
possible. Make sure the area is rust and grease free. A poor ground will
cause the unit to function improperly
PURPLE:
(22ga wire) Connect this wire to the
IGNITION
of the
vehicle.
ORANGE:
(This wire will provide a (+) 12V positive output for
powering a siren. Connect to the
RED
wire of siren.
GREEN:
This wire provides GND when the system trips. Connect to
the Black wire of the siren.
RESET
BUTTON
RED:
(22ga single wire): Connect this wire to one side of reset button
BLACK:
(22ga single wire): Connect this wire to the other side of
reset button