ATV IPVD2RWI, User Manual

Page: 12 / 88

2.3 Connection
• Connection Description
No. Connector Name Description
1 Micro-SD Slot Micro-SD memory slot
2 Service Monitor Port
Service Monitor & OSD Controller Communication Port,
Stereo Jack
3 Audio In & Out Port Audio Input and Output, Stereo Jack
4 Alarm In & Out Port
Alarm Input and Output, 4pin terminal.
Pin1,2: Alarm In #1,#2, Pin3:GND, Pin4: Alarm Out
5 Main Power
Main Power, 2 pin terminal,
Pin 1: GND/24VAC, Pin2: 12VDC/24VAC
6 RJ-45 port
Ethernet, RJ-45 port compatible with 10/100Mbps
having PoE functionality.
•
Micro SD memory slot on the Board
Card Slot for Micro SD memory: Socket “J2”
•
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally
a cross-over cable is used for directly connection to PC, while a direct cable is used for
connection to a hub. You can also use a router featuring PoE (Power over Ethernet) to
supply power to the camera.
•
Connecting Alarms
IN#1, IN#2 (Alarm In):
You can use external devices to signal the network camera
to react on events. Mechanical or electrical switches can be wired to the IN#1, IN#2
(Alarm In) and GND (Ground) connectors.
GND (Ground): Connect the ground side of the alarm input and/or alarm output to the
GND (Ground) connector.
OUT (Alarm Out): The network camera can activate external devices such as buzzers
or lights. Connect the device to the OUT (Alarm Out) and GND (Ground) connectors.
12