ATV IPSDMV22D1, User Manual

Page: 7 / 83

Chapter 1 — Introduction
1.1 Features
The IPSDMV22D1 camera and the keyboard controller, PC software makes up the building
blocks for any surveillance/security system. Using multiple keyboard controllers and multiple
dome cameras, no place is too large for monitoring. Extensible and flexible architecture facilitates
remote control functions for a variety of external switching devices such as multiplexers and
DVRs.

Built-in optical power zoom camera with True Night Shot function

Dual video streams simultaneously at full frame rate in all resolutions up to D1 (720X480 in
NTSC, 720X576 in PAL) using Motion JPEG and H.264 (or MPEG-4)

Intelligent capabilities such as enhanced video motion detection
The encoder’s external inputs and outputs can be connected to devices such as sensors and
relays, enabling the system to react to alarms and activate lights or open/close doors.

Supports two-way audio

Logs all user access, and lists currently connected users. Also, full frame rate video can be
provided over HTTPS.

Interface Protocol: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, QoS, FTP, SNMP, uPnP, RTP,
RTSP, RTCP, DHCP, ARP

120 Preset positions with the individual Camera AE setup

4 Tours consist of Presets, Patterns, Auto Scans and other Tours can be programmed with
over 150 functions and Preset locations. While moving, each Preset scan can be watched in
smooth
Vector Scan mode.

4 Auto Scans with the normal, the vector, and the random mode and the Endless Auto-Pan
with 13 speed steps

4 Patterns (up to 200 second) and 4 Privacy Zones

8 Area Titles

1 Alarm input / 1 Alarm output

Variable speed from 0.1

/sec to 380

/sec
Three Variable speed (SLOW, NORMAL, TURBO)
Turbo speed is 380

/sec with Ctrl key pressed.

Pan / Tilt speed is inversely proportional to the zoom ratio with the option.

Maximum speed is 380

/sec when Preset command.

Auto Calibration from 0.1

to 6

(Tilt range is 0

to 180

)

Programmable user preferences (alarm, preset, title, etc.)

180

Digital Flip

Up to 255 selectable camera addresses

Multi-language Menu Display, Password Confirmation

Function Run menu using DVR without function key (Pattern, Scan, …)

Built-in RS-485 receiver driver

12VDC for Dome

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.
1