26
WDR
OFF / ON (NOTE: When ON, BACKLIGHT will be disabled.)
WDR LEVEL
LOW / MIDLOW / MID / MIDHIGH / HIGH
NIGHT SHOT
AUTO / ON / OFF / GLOBAL
NOTE: Values in ( ) are for PAL Camera. The WDR operates in AE1 mode only.
NOTE: When BACKLIGHT set BLC or HLC, focus issues may occur in certain lighting
conditions.
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO
Camera goes in to B&W mode at low light.
GLOBAL
Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off the NIGHT
SHOT mode and “888” + ENTER will turn On the NIGHT SHOT mode.
ON
B/W mode
OFF
Color mode
NOTE: AUTO in NIGHT SHOT function is not applied in “MANUAL” mode of AE Control.
• DNR CONTROL
DNR SETUP
2DNR(1) : 003
3DNR(1) : AUTO
2DNR(2) : 003
3DNR(2) : 001
SAVE AND EXIT(ESC TO CANCEL)
2DNR(1), 2DNR(2)
Select 2D noise reduction level (OFF / 1 ~ 7)
3DNR(1), 3DNR(2)
Select 3D noise reduction level (AUTO / 1 ~ 28)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
• LINE LOCK CONTROL
LINE LOCK SETUP
MODE : INTERNAL
PHASE : 030
SAVE AND EXIT(ESC TO CANCEL)
MODE
INTERNAL / EXTERNAL
PHASE
Adjusts phase of picture with other cameras in EXTERNAL mode.
(0 ~ 262 NTSC, 0 ~ 312 PAL)