* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for reset to initial setting.
7-12.Set backlight
BL
(Initial Setting: OFF
）
・
Turn the backlight ON / OFF.
Turn on the backlight when using in a dark place. The backlight will brighten the screen and make it easier to see.
* When the backlight is ON, it consumes a lot of battery power and shortens the usage time.
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for polarity.
7-13.Set polarity
IN
(Initial Setting: OFF
）
・
When OFF, compression side is set to + and tension side is set to -, but when ON, compression side is set to -
and tension side is set to +.
Comparator
ＨＩ
Intermittent sound (fast)
Remove the load and press "RES" switch.
Comparator
ＬＯ
Intermittent sound (slow)
Remove the load and press "RES" switch.
Switch operation
Short sound
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
* Short press the "FUN" switch to confirm the setting. Next is the setting for backlight.
* The following is a list of buzzer sounds.
Action
Sound
The way to stop buzzer
Overload
Continuous sound
Remove the load and press "RES" switch.
7-11.Set buzzer
BP
(Initial Setting: ON)
・
Set whether to sound the buzzer or not.
The buzzer gives a warning during the main body operation or various settings.
When the buzzer sound is annoying, you can turn it off to silence the sound.
The display changes every time
the "DAT" switch is pressed.
The display changes every time
the "DAT" switch is pressed.
The display changes every time
the "DAT" switch is pressed.
