Page 23
© 2001-2015 attocube systems AG. Product and company names listed are trademarks or trade names of their respective
companies. Any rights not expressly granted herein are reserved. ATTENTION: Specifications and technical data are subject
to change without notice.
III.5.a.
The cantilever mounting platform
The mounting platform provides three stages for
the alignment and adjustment procedures of the
cantilever on the AFMI head, namely:
I – cantilever exchange stage
II – AFM head parking site
III – slider module parking site
III.5.b.
Cantilever exchange
In order to change the cantilever you need to:
Put the cantilever holder into the cantilever
exchange stage (
1
).
Slide back the spring blade, first push the back
part down (spring opens) (
2
) then pull the
slider towards the back(
3
).
In order to fix the AFM head into cantilever
exchange stage, you need to turn the black
knurled
w
heel sitting left to it.
II
I
III
Fix
