Atten AT858D+, Manual

Page: 2 / 4

2
Handle shelf
Replaceable Parts
NO. Name of parts Instruction
1 Components of the handle 220V
Components of the handle 110V
2 Handle shell
3 858 PCB(component) LED-based Instruction
4 PCB(component) LED Microcomputer Digital Display
5 pump
6 858 heating core 220V
7 858 heating core 110V
8 Handle shelf
9 858 nozzle One set
Usage
- Soldering and de-soldering the most of the SMD component, such as SOIC, CHIP, QFP, PLCC, BAG and so
on.
- De-solder different shielding boxes or shielding covers conveniently. Make heat shrinkage for the heat-
shrink tube and the PVC tube.
- Warm-up the mini-type metal and the mechanism, relax firm components.
- It can be used for the lapped soldering for the PVC paint and the composition cloth, and the soldering of
the bitumen for the roof. And use the high temperature to do disinfection works for animal cages
- Make the PVC, PS, high temperature plastic and the wood formed.
- Make the thaw for the ice, conduit pipe and mechanism.
- Make the paint, the strainer and the glue water heating dry.
- For all the heating without fire.
Temperature Setting
Air Rework Station of LED-based Instruction Rotate temperature control knob to the desired location of
the temperature scale line.
Hot Air Rework Station of LED Microcomputer Digital Display: When connecting the power, press the
connected keys; then the setted temperature will appear on the temperature display window. Press the
key that is upward; then the setted temperature will rise by 1, which will appear on the display window.
Press the key that is downward; then the setted temperature will fall by If the two keys are pressed
successively, the temperature will rise or fall rapidly. If you release the pressed keys, the setted
temperature will appear for two seconds on the display window and then the actual temperature will
appear.