Type
6 in, Rectangle, Inside graduation
Phosphor
P31
Acceleration Voltage
Approx 2kV 200MHz
CRT Screen Size
8×10DIV[1DIV=10mm(0.39in)]
Graduation
Inside
C
R
T
O
sc
ill
os
co
pe
T
ub
e
Trace rotation
Adjustable via panel
Power requirement: Operating Ambient: Accessories:
•
Voltage
: Fixed AC220v±10% or Indoor, 2000m elevation
•
Power cord: ×1
110/220V±10% changeable
•
Ambient temperature:10
35
•
Instruction manual:×1
•
Frequency
: 50/60Hz
•
Max operating range:0
40
•
Probe:×2
•
Power consumption
: approx.40VA
•
Humidity: 85% RH, dry
•
Size: 310×150×455(mm)
•
Weight: approx. 8kg
•
Storage temperature: -10
70
Precautions
1.
Unsealing
Strict inspection and test are done before leaving factory, open the package immediately as this item is received to
check whether there is any spoilage during transportation, if yes, contact supplier or sender immediately.
2.
Check power voltage
AC 110V/220V is available, check the voltage switch whether conforms with the local supply or not before switch
on.
Notice: Failure in select power will result in damage the oscilloscope.
Warning: To prevent electric shock, do connect protect terminal to ground reliably.
Replace the fuse refer to the following form if the fuse is burnt out.
(Form 2)
Voltage
Range
Fuse(AT7328)
Fuse(AT7340)
Warning: For protection, cut off power before replacing the fuse.
3.
Environment
Ambient temperature of operation between 0-40 is recommended. If you operate this item under exceeding
temperature range which may damage the circuit
4.
Installation and Operation
