select segment you want to setting. Press the key
“RUN”
returns back the
standby menu, and press the key
“SET”
to enter the temperature setting state.
As shown in figure 5.
Note:
Except the displayed, the mode of the graphics display and
the text display are the same.
Setting parameters of the segment
“PREH”
Press the key
“SET”
once to enter the setting state of preheat segment,
as shown in
“Fig 7”
、
、
、
、“
“
“
“
Fig 8”
Press the key
“SET”
again enter the
temperature setting state, as shown in
“Fig 9”
、
、
、
、“
“
“
“
Fig 10”
press the key
“
” or
“
”
change the temperature between (70~15
0℃).
Press the key “SET” to
saving or press the key
“RUN”
to discard modification.
After temperature setting, press the key
“SET”
once to enter the time
parameter setting state, as shown in
“Fig 11”
、
、
、
、“
“
“
“
Fig 12”
Press the key
“
” or
“
”
setting the time between (0~5Min), press the key
“SET”
to saving. After
saving the parameter, press the key
“RUN”
enter the standby state.
Under the graphics display mode, the curves will auto redraw after return to
the standby state.
Fig7 Text
Pre-heat settings Fig8 Curve
Pre-heat settings
