9
Intended use
The Zirocco-M50 intended use is for outdoor drying and cleaning of roads, runways, concrete areas or
other areas of non-flammable surfaces.
The product is using the exhaust from a micro jet turbine to dry and clean the surfaces and should not be
used on surfaces covered with sand or gravel as well as waste of or close to flammable materials.
The product is intended to be operated by a professional construction worker according to the guidelines in
the instruction manual using the required PPE's.
When operating the Zirocco-M50 hearing protections is mandatory. In restricted work areas with limited
air exchange respiratory protection or a limited use can be necessary to apply.
A backup operator needs to be present, where oncoming traffic is not shielded from the working area or on
roads in hilly areas.
Misuse
The product Zirocco-M50 should not be used indoor, since the jet turbine is using diesel fuel and the
exhaust emission could be toxic.
As soon as the turbine engine is warming up or running the machine needs to be moved in order not to
leave unintended hot spot marks on the ground.
Bystanders should be kept behind the machine when working, or at a safety distance of 5m away from the
nozzle cover in the working direction. The exhaust can lead to ejection of debris such as dust, sand or small
gravel, which can lead to eye injuries.
Examples of intended use:
•
Drying and cleaning prior to
road marking
•
Drying and cleaning prior to
crack repair and joint sealing
on roads, runways, aprons etc.
•
Drying and cleaning prior to
line and tape marking/removal
•
Drying and cleaning prior to
paving on concrete and asphalt
.
This Operating Manual utilise the following safety signs. Follow these safety signs carefully since failure to
comply may cause personnel injuries or irreparable damage to the equipment.
Summary of Contents for Zirocco-M50
Page 1: ...Operating Manual Zirocco M50 Jet Dryer Cleaner ...
Page 24: ...24 Dimensions ...
Page 25: ...25 ...
