11
2. On-Screen Menus
Ensure all connections have been made following the diagrams on the previous
pages for reference.
When you plug the power cord of this set-top box into a power outlet and press
the
POWER
switch on the front panel, the box will be turn on for the first time.
Press
STANDBY
button on the remote control will switch the set-top box to or
from standby mode.
Turn on the TV set and switch it to external AV mode, you will see the picture
come from the box.
If it is the first time you use this device, an Auto Program menu appears to let
you to scan all the available channels in your area.
Main Menu
Press the
MENU
button on the remote control, the main menu will display as
below. the
Auto Program
focus is highlighted as default.
2.1 Auto Program
If it's the first time you use the box, you should scan all the TV channels first,
press the arrow buttons to move the cursor to
Auto Program
in main menu,
press the
OK
button to confirm, you will see below menu which indicates auto
search is in process. After all channels in your area are found, you will see the
first found channel showing on the screen. Any time if you want to start auto
channel search again, you can follow the above procedure.
Main Menu
Auto Program
Manual Channel Set
Password
Parental Controls
Advanced Closed Caption
Language
Auto Power Down Timer
Smart Antenna
English
Off
To Exit
To Move
To Select
Exit
OK
Scanning
0
Autoprogram Menu
Performing First Pass
Digital Channels Found
Progress(%)
14
Channel 17
0
Autoprogram Menu
Searching digital channels
Digital Channels Found
Progress(%)
69
To Exit
To Move
To Select
Exit
OK
Initial Setup Menu
Menu Language
Auto Program
English
Summary of Contents for AT2016
Page 20: ......
