ATS NASA 2001 is equipped with a Valet / Service Override switch which allows the vehicle operator to disable
ATS NASA 2001
.
To get into the valet mode, first insert the car key into ignition, turn it “ON” and hold the push button switch for 3
seconds until the LED comes “ON” and quickly flashes three times. The system has entered into the valet mode.
Turning ATS NASA 2001 into the Valet Mode will still allow the paging features to be activated by telephone
commands.
To get out of the valet mode: press the Valet/Service Override button switch momentarily. The LED will go out.
NOTE:
After ATS NASA 2001 is set to the valet mode, please do not use the Remote Key-Chain Transmitter
Button #1 to lock or unlock your car. If you do so, the valet mode will be reset and PageAlarm™ 2001 will
be either armed or disarmed.
LED INDICATOR
The LED “Armed Status Indicator” serves several purposes. Not only does the LED act as the first line of
defense, deterring potential on-looking thieves, but also informs the user what mode the system is currently in.
Please consult the LED reporting functions below.
Alarm Mode
LED Indication
Armed
Slow Flash
Passive Arming upon EXIT
Double Flash
Valet Mode
Three Flashes
5. Remote Control Transmitters
ATS NASA 2001 transmitter has two buttons:
(1)
Button #1 (the left hand-sided one) is normally used to arm or disarm the system.
(2)
Button #2 (the right hand-sided one) is used to activate the panic mode function by pressing and holding it for 4
seconds. It is also used to control the car-finding function by pressing it momentarily once. After the panic
mode is activated it can be de-activated by pressing the button #2 momentarily
.
Transmitter Battery
The transmitter is powered by a 12V battery which can be accessed by carefully opening the transmitter’s case
after the two screws at the bottom are removed.
6. Silent Arming or Disarming
Silent Arming or Disarming can only be activated or deactivated in the Disarm mode. It can be set by turning
ignition “ON” and pressing button #2 of remote transmitter momentarily; you will hear the siren to confirm an
entry into the programming mode with 3 chirps. Within 7 seconds, by pressing button #1 momentarily the silent
