ATS Maximus MCJ2000 Series, Reference Manual

Page: 136 / 214

4-20 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Setup Mode Chapter 4: Color Terminals
Figure 4-17 Select Device Type Screen (Shown with Modem Option Selected)
7. If the Maximus connects to a serial modem, press the”F2” key to select
appropriate
Country Code for your modem (e.g., the T.35/D1/J1 country code
for the United States is B5 while the S1 code is 22). This parameter enables you
to enter a number from 00–FF using the numeric keys for numbers and the
function keys for letters. The value is displayed in the enter of the screen. You
can press the “
clear ” key to delete a number. With the desired number
displayed, press the “ enter ” key to accept the number. This selection does not
time out.
8. Press the “F8” key to select Return To Setup . Selecting this option returns you
to the Setup Mode, Main Menu Screen – Host Type Serial (see Figure 4-14 on
page 4-15 ).
Comm Port
The Comm Port menu enables you to configure the serial communication port settings. These
settings must match the communication software and hardware you are using to connect to
the terminal. Press “F7” from the “Setup Mode, Main Menu Screen, Host Type Serial screen”
(see
Figure 4-14 on page 4-15 ) to access the Comm Port menu screen as shown in Figure
4-18 .
09:39 AM
Thursday
Nov 13, 2014
Next
Modem
Select Device Type