ATS Maximus MCJ2000 Series, Reference Manual

Page: 131 / 214

Chapter 4: Color Terminals Setup Mode
MANU-MAXIMUS-02 Maximus Reference Manual 4-15
Revision-02
Setup Mode
Use setup mode to configure the terminal, including setting serial or Ethernet host and
parameters.
To enter setup mode, press the”F1” key to select Setup Mode when in the Test, Setup, And
Diagnostics screen (see "Test Setup Diagnostics" on page 4-12 ). You can also enter Setup
Mode by selecting Exit Setup (in multiple screens) then Return To Setup (from the Reboot
Confirmation Window).
Setup mode has two screens, one for serial host setup and the other for Ethernet setup (see
Figure 4-14 on page 4-15 and Figure 4-15 on page 4-16 ).
Host Type
Press the “F1” function key to toggle between Host Type Serial (see Figure 4-14 ) and Host
Type Ethernet (see Figure 4-15 ). For more information, see either "Ethernet Setup" on
page 4-22 and "Serial Setup" on page 4-18 .
Figure 4-14 Setup Mode, Main Menu Screen – Host Type Serial
03:34:22
Friday
Nov 7, 2014
Host
Type
Serial
Setup
Serial
Device
None
Set
Password
Comm
Port
Exit
Setup
Clock Address XX
Country Code XXX
Auto Answer XX
Setup