Atrust m320, User Manual

Page: 34 / 50

Getting Your m320 Ready for Use
Updating Drivers and the Utility
26
Updating the LAN Station Driver and MultiPoint Manager Add-in
To update the LAN station driver and MultiPoint Manager Add-in for your m320-based LAN stations, please
do the following:
1. On the primary station, log in to your MultiPoint Server system with an administrative account, and then
launch
MultiPoint Manager
.
1. On
LAN Stations
tab, click
Assigned Stations
, and release all LAN stations from the host server by clicking
each station and
Clear assignment
. Click
Yes
to confirm when prompted.
2. On MultiPoint Manager, switch your system to the Console mode by clicking Switch to console mode .
3. A window appears prompting for confirmation. Ensure that you and other system users have saved their
work before clicking
OK
.
WARNING
• Switching the system mode will end all user sessions. Ensure all users have saved
their work to prevent data loss.
4. Switch off all your m320-based LAN stations.
5. On the primary station, press
Ctrl+Alt+Delete , and then log in with the same administrative account.
6. On the desktop, move mouse to the left-bottom corner, and then right-click on the appeared [Start].
A popup menu appears.
7. Click to select Programs and Features on this popup menu.
8. On the Programs and Features window, click to select
LAN Station Driver and Utility
, and then
click
Uninstall
.
9. A window appears prompting for confirmation. Click Yes to continue.
10. A new window appears prompting for system restart. Restart your system as required to continue.
11. On the primary station, log in to your system with the same administrative account, and then click
Desktop
on the Start screen.
12. The wizard starts uninstalling
LAN Station Driver and Utility
.
13. After completion, click Finish to exit the wizard, and then restart your system as required.
14. Switch to the Console mode again, and then install the new LAN station driver and utility.
15. After completion, click
Finish to exit the wizard, and then restart your system as required.
16. Switch on all your m320-based LAN stations.
17. Re-assign each LAN station to the host server and allow firmware update when prompted.