Turn off and on the DVR!
HDD CHECKING
OK
Power up the unit
After the unit is properly installed, the unit is ready to record and play. Then
apply power and switch on.
Notice: Make sure the HDD is powered off
before removing the drive
After the unit is powered on, the
unit is checking HDD for several
seconds, the information will be
displayed on the screen as right:
CH1 CH3
CH3 CH4
The unit will enter into
real-time display mode
shown as the right figure:
NOTICE
1. Make sure the HDD is off
1. Make sure the HDD is off
before removing the drive
before removing the drive
2.Once you resume the initial
2.Once you resume the initial
setting, the right information
setting, the right information
will be displayed on the
will be displayed on the
screen. Then turn off the unit
screen. Then turn off the unit
and re-power on it.
and re-power on it.
8