8
June 2004
Seiko PS
A-66-ST
Paper Feed Operation
The printer has been designed to run with black
mark indexed paper. Paper feeding is accomplished
by use of the feed button. Each long press (~1 sec-
ond) of the feed key will result in paper being ad-
vanced to the top of the next form.
Cut Key Functions
The CUT key performs no function in the PSA-66-ST
printer and should be ignored.
Self Test
If the FEED key is depressed and held during power
up or reset, a self test will be triggered which will
result in the proper printing of a configuration ticket
if the self test is successfully.
Clearing a Paper Jam
The printer has been designed to operate reliably
with a minimum of paper jamming. Should it be nec-
essary to clear a paper jam however, follow the simple
instructions below. After the jam is cleared, per-
form these operations in reverse.
When clearing a paper jam:
DO:
Insure that all paper paths from the entry point at
the back of the paper well, through the printer and
the presentation chute are clear of paper or obstruc-
tions
Use the platen release lever located on the side of
the unit
Use the rotary screw at the top of the printer
DO NOT:
Ever allow a screw driver or other probing object to
come into contact with the printer; this can cause
permanent damage
H
ANDLING
