7
March 2006
Ticket Printer Ithaca
®
Epic 950™
Cleaning the printer
Use a soft brush to clean paper dust from inside the
printer and chassis area. The paper dust should also
be removed from the sensor optics.
Cleaning the Print Head
If streaking on the printed ticket is evident, the ther-
mal print head may need to be cleaned. This can be
done by inserting a thermal printer cleaning card.
1. Remove remaining tickets from the ticket path and
check for any debris.
2. Close the Ticket Cover, if it has been opened.
3. Make sure that there is power to the printer.
4. Unpack a 2.5" x 6" Thermal Cleaning Card and in-
sert it into the feed path. The cleaning card will
automatically be drawn into the feed path.
5. Open the cover and remove the cleaning card by
gently pulling it back.
6. Repeat the process if necessary.
7. Properly dispose of used cleaning card.
Top-of-Form /
Ticket Out Sensor
Ticket Taken
Sensor
Paper Low Sensor
O
PERATING
Cover Open Switch
Ticket Burst Sensor