19
June 2008
Harmony™ Installation Manual
MACHINE INSTALLATION
continued
Machine Mounting
(continued)
6. Connect the toplight and mount as illustrated. Hold
the toplight at its lower ring, when you screw it
into the bayonet catch to avoid damaging the top-
light.
7. Make sure that the mains power cable is comple-
tely inside the machine and that hopper drawer
and maindoor are closed and locked.
Two forceful persons (one on each side) should lift
the machine and then slide it onto the AIS. The
baseplate of the machine will grasp into the gui-
des of the AIS. If available, use a lift truck.
Caution!
The machine weighs approx. 100 kg.
Make sure that the mains power cable is
completely inside the cabinet
and not
threaded through the AC hole, before sliding
the machine onto the AIS! Otherwise the
cable will be damaged!
8. Use at least one securing bolt to secure the ma-
chine to the AIS and the base stand. Fix the bolt
with washer and wingnut.
It is not important which of the 3 holes is used, if
at least one securing bolt is mounted. If the base
stand has braces or struttings placed below one
mounting hole, simply use another one.
Replace shipping locks
Atronic machines are equipped with shipping locks
for easy commisioning. These locks have to be replaced
by casino specific locks to provide appropriate
security.
M
ACHINE
I
NSTALLATION
Hold here