19
April 2008
e-motion™ Installation
MACHINE INSTALLATION
Machine Mounting
(continued)
6.Make sure that the mains power cable is comple-
tely inside the machine and that hopper drawer
and maindoor are closed and locked.
Two forceful persons (one on each side) should lift
the machine and then slide it onto the AIS. The
baseplate of the machine will grasp into the gui-
des of the AIS. If available, use a lift truck.
Caution!
The machine weighs 120 kg (264 lbs)!
Make sure that the main power cable is
completely inside the cabinet
and not
threaded through the AC hole, before sliding
the machine onto the AIS! Otherwise the
cable will be damaged!
7. Use at least one securing bolt (delivered with the
machine) to secure the machine to the AIS and
the base stand. Fix the bolt with wingnut and
washer.
It is not important which of the 3 holes is used, if
at least one securing bolt is mounted. If the base
stand has braces or struttings placed below one
mounting hole, simply use another one.
Replace Shipping Locks
If not ordered otherwise, Atronic machines are
equipped with shipping locks for easy commisioning.
These locks have to be replaced by casino specific
locks to provide appropriate security.
M
ACHINE
I
NSTALLATION