Atronic Cashline, Manual, Page: 31 / 56

31
January 2005
Progressive Jackpot
Troubleshooting APL
APL: Duplicate Slave ID detected
This message occurs if at least two Slave machines
have the same address.
Solution
: Change ‘Progressive System addresses’
to unique addresses from "01" to "32". Powercycle
machines with duplicate addresses for new
initializing.
APL: Link Not Allowed
There is no Security Chip with progressive feature
on the main board (P-GAL).
Solution : Install a Security Chip with progressive
feature.
APL: Configuration required
There is no Jackpot configuration.
Solution : Carry out Jackpot Configuration.
ALINK: Duplicate terminal ID detected
This message occurs, if at least two machines are
defined as master (DIP-switch S5/4 on Commboard).
Solution : Ensure that only one machine in the link is
defined as master.
APL: Progressive Not Connected
APL: Master not ready
Machine is not connected with APL master machine,
the power supply of the Alink network is not
connected or no master is defined in the link.
Solution : Connect machines with master. Connect
power supply for A-link™ network. Define one master
machine in the link.
ALINK: Please set valid terminal ID 1..32
Progressive system address has not been set or
has been set higher than "32".
Solution : Set progressive system address to an
address between "01" and "32" with commboard
rotary switches S1 and S2.
Note :
This message is also displayed
at all APL Slave machines prior
to Jackpot configuration.
Message expires when the
Master machine is configured.
Note :
This message is displayed at
APL Master machine prior to
Jackpot configuration.
Message expires when the
Master machine is configured.
APL T
ROUBLESHOOTING