15
February 2008
Cashline™ Wide Body Cabinet (WBC) - Installation Manual
MACHINE INSTALLATION - OVERVIEW
This section should only be carried out by
Qualified Technical Service Personnel
.
Review the list below and perform as needed.
Explanations are located on the following pages and
in additional manuals.
Inspect machines for transport damage. Any
transport damage should be noted and witnessed
by the freight forwarder. The manufacturer accepts
no responsibility for transport damage.
Check machines for the correct Paytable, Glasses,
Hardware configuration and that Software EPROMs
are correctly installed on the PCBs.
Prepare the base by drilling the mounting holes.
Use the Atronic drilling template for proper
mounting hole placement.
Place and mount the machine to the base.
Run the power cable into the base. Do
not
connect
power to the machine.
Install the Toplight.
Replace shipping locks with Casino specific locks.
Install and connect Online/Accounting system.
Check that all internal and external connections
are seated correctly.
Prepare Coin Comparator and Hopper.
Apply power to the machine.
Load paper into the Printer.
Execute basic machine setup (Initial Setup)
Configure game.
Test Bill and Coin handling.
M
ACHINE
I
NSTALLATION
Note
:
Depending on machine
configuration and/or
jurisdictional requirements,
additional tasks may have to be
carried out before the machine
can be put into operation (e.g.
acceptance inspection, logicbox
sealing, etc.).
