- 6 -
Furniture nozzle
For furniture, curtains, drapes, etc.
Use Vacuum Cleaner
1:Before using the vacuum first pull out a sufficient length of electric power cord and plug into the outlet. The
yellow mark on the power cord is the maximum length that must not be exceeded.
To switch on the device press the foot pedal button
on the casing with your foot.
2: To rewind the power cord, press the button
with one hand and guide the cord with the other hand to
ensure that it does not whip causing damage.
Caution:
Never operate the vacuum cleaner without the HEPA bag filter or motor filter, otherwise the device
could be damaged.
Changing the HEPA filter bag
If the vacuum’s suction is reduced, this may be because the HEPA filter bag needs changing. Raise the wand
off the floor, set the suction force regulation to MAX, switch on vacuum cleaner using the on/off button, and
keep an eye on the bag change indicator. If it is red, the HEPA filter bag must be changed.
1.
Turn off and unplug cleaner.
2.
Remove the hose, open bag cover by pushing
latch up with fingers and lifting bag cover.
3.
Grasp the millboard at the top of the HEPA filter bag and carefully
remove the bag from the vacuum cleaner.
4. Throw the HEPA bag in the bin. Make sure that there are no holes in it.
5. Insert a new HEPA bag in the vacuum cleaner.
The vacuum cleaner must never be used without a HEPA bag.
6. Close the vacuum cleaner again.
