Atrix Ergo Pro Owner'S Manual Download Page 10

10 

 

HOW TO CHARGE THE BATTERY PACK  

 

When using the charger, basic precautions should always be followed, 

including the following:  

 

Battery and Charging Safety 

 

To reduce the risk of electric shock, fire, battery explosion, or injury:  

 

1.

 

Basic information and warning for ATRIX Battery and Charger 

are  contained below. For detailed usage and warning 

information, read the HOW TO CHARGE THE BATTERY PACK 

carefully before using this unit.  

2.

 

Use only the ATRIX Charger and ATRIX Battery Pack.  

3.

 

DO NOT

  expose battery pack to temperatures above 122°F 

(50°C). Never leave battery packs in automobiles on hot days, 

where temperatures can be much higher than the outside 

temperature.  

4.

 

DO NOT

  use or store vacuum or batteries in wet or moist 

conditions, or with flammable or combustible materials.  

5.

 

DO NOT

  charge batteries or store batteries for extended 

periods, 1 month or more, in temperatures above 90°F (32°C) 

or below 40°F (5°C).  

6.

 

When charging, make sure that the charger and battery has at 

least 6 inches of clearance on all sides. Adequate airflow is 

required to cool them during the process.  

7.

 

DO NOT

 use a damaged cord or plug for charging.  

8.

 

DO NOT

 pull on charger’s cord to unplug. Grasp and pull the 

plug, not the cord.  

9.

 

DO NOT

 handle the charger’s cord plug with wet hands when 

inserting into electrical outlet.  

10.

 

Keep sparks and flames away from batteries. Do not smoke near 

batteries or charger.  

11.

 

DO NOT

 charge the unit outdoors.  

12.

 

DO NOT

  attempt to repair, service, or modify the battery 

system or charger. Contact Atrix with any issues.  

13.

 

DO NOT

  short-circuit the battery or charger terminals with 

conductive items such as paper clips. This can deliver high 

current, resulting in heat and fire.  

14.

 

DO NOT 

crush, drop, incinerate or damage the battery pack. 

DO NOT

 use a battery pack that has been damaged in any way. 

DO NOT

 incinerate the battery even if it is severely damaged or 

non-working. The battery can explode in a fire. 

Summary of Contents for Ergo Pro














Reviews: