5
IMPORTANT INSTRUCTIONS
Before use the equipment must be correctly assembled with all of its components
Check that the electrical outlet is correct for use with the plug on the machine
Before connecting, check that the specified motor voltage corresponds to the main
voltage available
Never use the equipment near flammable, explosive or toxic substances: sparks from
the motor could cause dangerous reactions.
Always unplug the machine from the electrical outlet when leaving machine unattended
or before attempting any repair.
Service and repair should be done by qualified personnel only. Use only original
manufacturer’s replacement parts.
Operation
This machine is a commercial vacuum designed for dry pick up only. And must be stored in
a dry location.
1.
Attach paper bag to tank inlet deflector. See Figure 1.
2.
Ensure that the cartridge filter is securely attached to the
bottom of the vacuum head. See Figure 2.
3.
Stretch treated pre-filter over the HEPA cartridge filter. See Figure 2.
4.
Attach filter retainer using the 2 mounting screws.
5.
Place vacuum head onto the tank and secure it with the two
clamps.
6.
Insert hose into the tank inlet until it locks in place. See
Figure 3.
7.
Attach appropriate cleaning tool.
8.
Activate the vacuum by pressing the switch on the vacuum
head.
Figure 1
Figure 2
Figure 3
After Use
1.
Store the cord on the hook.
2. Store the appliance indoors, away from sources of heat.
3. This appliance is provided with an automatically reset
thermal limiter to avoid damage to motor. If thermal limiter
operates do one or more of the following:
Change the bag
Clean or replace the cartridge filter
Check hose and tank inlet for any obstructions
Wait a few minutes for the thermal limiter to re-close the circuit
