- 6 -
Use
Vacuum cleaning
1. Before using the device first pull out a sufficient length of electric power cord and plug into the outlet. The
yellow mark on the electric power cord is the maximum length that must not be exceeded. To switch on the
device press the foot pedal button on the casing with your foot.
2. To rewind the power cord, press the button with one hand and guide the cord with the other hand to ensure
that it does not whip causing damage.
Caution:
Never operate the vacuum cleaner without the HEPA filter bag or motor
filter, otherwise the device could be damaged.
Changing the HEPA filter bag
If the vacuum
’s suction is reduced, this may be because the HEPA filter bag
needs changing. Raise the floor brush off the floor, set the suction force
regulation to MAX, switch on vacuum cleaner using the on/off button, and
keep an eye on the bag change indicator. If it is red, the HEPA filter bag must be changed.
1. Turn off and unplug cleaner.
2. Remove the hose, open the HEPA filter bag cover by pushing latch up with
fingers and lifting cover.
3. Grasp the millboard at the top of the HEPA filter bag and carefully remove
the bag from the vacuum cleaner.
4. Throw the HEPA filter bag in the trash. Make sure that there are no holes in it.
5. Insert a new HEPA filter bag in the vacuum cleaner. The vacuum cleaner
must never be used without one.
