5
Tube
You
ameriwoodhome.com
OPERATING INSTRUCTION
On the top-right of the electric firebox is the touchscreen control panel. This panel contains the
buttons to properly operate the electric fireplace. the buttons on the remote control function in
the same way. The remote control has an effective range of up to 6 m.
Digital Display
NOTE: The remote control is intended only for the functional operation
of the product, It can not lock/unlock the heating function
！
POWER
The POWER button turns the appliance on or off. It has a memory function; the button turns
off all functions at once but retains the settings in the memory. By pressing the button again,
the unit will turn on at the same settings. If the TIMER has set & time has expired all functions
will stop. Press the POWER button start the appliance.
FLAME
The FLAME control switch manages the flame brightness. There are 4 brightness levels and an
off position. Each time the FLAME button is pressed, the intensity of the flame decrease. When
adjusting the FLAME button, a number indicating the brightness of flame will be visible on the
digital display.After turning on digital display, if nothing happens within 10 seconds, digital
display will turn off.
HEATER
The HEATER button turns the heater on and off. When in ON position, press and hold the
HEATER button 5 seconds and enter temperature adjustment mode(Note: This can't be set with
the remote control). In the adjustment mode, the digital display will flash at 0.5 second inter
-
vals. There are 11 temperature settings:72
℉
-74
℉
-76
℉
-78
℉
-80
℉
-82
℉
-ON-64
℉
---72
℉
(22
℃
-23
℃
-24
℃
-25
℃
-26
℃
-27
℃
-ON-18
℃
---22
℃
) After the temperature is selected the digital
display will flash 5 times and exit from setting status. After turning on the digital temperature
display, if nothing happen within 10 seconds, the digital display will expire.
Temperature unit convert function: With the heater is ON the position, press and hold the
power icon for 5 seconds, current temperature unit display will flash 3 timers and convert to
another temperature unit
(Note: This can't be set with the remote control)
.
Lock & unlock heater function: press and hold the heater icon for 10 seconds, the ember bed
will flash 6 times, indicating that the heater function is locked. To unlock the heater function,
just repress and hold the heater icon for 10 seconds again, then the ember bed will also flash 6
times indicating the heater function is unlocked and to recover the original states which you
have set
(Note: This can't be set with the remote control)
.
