12
2.
Press the
MAX/MIN
key again and the display icon "
MIN
" will
appear. The meter will display and hold the minimum reading and
will update only when a new “min” occurs.
3.
To exit MAX/MIN mode press and hold the
MAX/MIN
key for 2
seconds
DISPLAY BACKLIGHT
Press and hold the
HOLD
key for >1 second to turn on or off the
display backlight function. The backlight will automatically turn off
after 10 seconds.
HOLD
The hold function freezes the reading in the display. Press the
HOLD
key momentarily to activate or to exit the
HOLD
function.
Hz/duty
1.
Switch to Hz/Duty range.
2.
Press the Hz/Duty button to show the reading in the display
and the "
Hz/Duty
" indicator will appear on the display.
DC VOLTAGE MEASUREMENTS
CAUTION:
Do not measure DC voltages if a motor on the circuit is
being switched ON or OFF. Large voltage surges may occur that can
damage the meter.
