TIP:Pressing the
button again will exit this set-up mode,
leaving the thresholds number unchanged.
5.2 Changing the Thresholds Range
Press the
button, use the
and
buttons to select the
required thresholds number , and then press the
button.
Afterwards, use the
and
buttons to first change the value of
the upper threshold followed by the
button; and then to change
the value of the lower threshold followed by the
button to store
the new values:
TIP: Pressing the
button at any point will exit this set-up mode,
leaving both the thresholds number and thresholds value
unchanged.
6. Sample Measurements and Test Results
6.1 Sample Measurement
With the instrument turned on and internal calibration done,
thepreparation of the new measurement is compeled.
Summary of Contents for LBY-420
Page 1: ......
Page 7: ...Instrument indication ...
