SW5501 – SW5502
Wireless Serial Server
User Manual
Link modes and
Applications
5.3.4
Configure SW550X as a Wireless Client in the Infrastructure mode (PEAP-MSCHAPv2)
To configure SW550X as a Wireless Client in infrastructure mode with PEAP
-
MSCHAPv2 authentication mode and
AES encryption, please click on Basic Settings page under the Wireless menu and follow steps in
Paragraph 4.2.1
Figure below shows an example of a wireless client in infrastructure mode with
this authentication mode
enabled as summarized in
Figure 5.21
Wireless Client with PEAP Security Settings for SW550X
Table 5
.
5 Wireless Client-Infrastructure Topology Parameters with WPA2
(
PEAP
-
MSCHAPv2
)
Security
.
Topology
Infrastructure
Band Mode
Auto
Tx Rate
Auto
Channel
Disabled
(
auto sensing
)
Authentication
WPA2
(
PEAP
)
Encryption
As defined by the Access Point
Username
Defined by the RADIUS Server
Password
Defined by the RADIUS Server
