Atop Smart Security Server
IS150
User Manual V1.0
32
4.4.6 DHCP Server (Regular AP Gateway Mode)
If there is no workstation or server to act as the DHCP Server and assign IP addresses to each client
automatically, IS150 can serve as the DHCP Server to statically or dynamically assign an IP address
to any network device. To enable such functionality, check
Enabled
to enable the DHCP Server in
IS150
;
proceed then to fill in the
IP Address Range
including the
“From IP Address”
and
“To IP
Address”
, fill in the IP address’
Netmask
(or
Subnet Mask
).
“Lease Time”
is the duration in minutes
that an assigned IP Address will belong to that device; once expired, the IP address will be recycled. A
maximum of 21600 minutes is set by default.
You can also assign a static IP address to a network device, meaning that the network device would
always get the same Static IP Address from the DHCP server. To statically assign an IP address,
check on the small box in front of each line, and then fill in the
Host Name
and/or the
MAC Address
that you want to assign a static
IP Address
to. When DHCP is enabled, up to 32 different static
IP/MAC can be set, Figure 4.20.
Figure 4.20
