Atop SE59XX-SDK, User Manual, Page: 19 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
2.3.2 Use Device Manager or Device Management Utility
Please use a CAT5E cable to connect SE59XX to a PC running Windows where ATOP Device Management utility
is already installed. To install Device Management Utility, please download the latest release from ATOP Website
and follow its dedicated user manual for the installation.
The device doesn’t have necessarily to be directly connected to the PC, as long as it is inside the same LAN.
Atop Management Utility will scan the whole network automatically.
Figure 2.9 SE59XX connection scheme (example on SE5904D)
Now, please power on the device and run Atop’s Device Management Utility from your Host PC. Once the device
is running, the utility will list all devices found. If the device doesn’t show up, push the leftmost button (Rescan
function). Once identified, select the device by mouse left button and select "Firmware" >> "Download Firmware"
as per Figure 2.10.
Figure 2.10 Firmware update prompt
Select the firmware (Kernel or AP) from this dialog and select the upgraded file as Figure 2.11. Then, click on the
"
Upgrade
" button to upgrade the firmware selected.