Atop Modbus Gateway
MB5400 Series
User’s Manual V 1.3
52
3.10.6
Security
Security Settings, which are device’s password and access control settings, are available in
this section as shown in Fig. 3.30. The default security setting for the password is a null
password, i.e. no password at all. To enable security, you can enter your preferred password in
the
Change Password
box. Note that you have to enter the
Old Password
(enter nothing in
case of a null password), the
New Password
, and the
Verified Password
(same as the New
Password). Note that the password is case sensitive and limited to the maximum of 8 characters.
After entering all required fields, click on
Save Password
button to commit the change. After
the
Save Successfully
message showed up, you will be prompted with a pop-up window to
enter the
User name
and the
New Password
as shown in Fig. 3.31.
Fig. 3.30 Security Setting Page
