MB52XX Modbus Gateway
User Manual
Configuration
and
Setup
Figure 4.32 Export Configuration File from Modbus Gateway
4.9.8
Factory Default
A return to
Factory Default
function is available in Atop
’
s MB52XX Series
.
To restore all parameters of the Modbus
Gateway to the original factory default setting, click
Set to Default and Restart
button as shown in Figure 4.33
After a short moment, a message indicating
System Restarting
status with a countdown number will show up
.
After a successful device
’
s restart, the web browser will be redirected to the Overview page as shown in Figure 4.7
Figure 4.33 Factory Default Web Page
4.10
Restart
For some unexpected circumstances, the Modbus Gateway system may stop responding correctly
.
The user has
the option to
restart the device by clicking the
Restart
button as shown in Figure 4.34
The device
’
s RUN LED will
start blinking when the restart process is completed
.
Then, a message indicating
System Restarting
status with a
countdown will show up
.
After a successful device
’
s restart, the web browser will be redirected to the Overview
page as shown in Figure 4.7
