MB52XX Modbus Gateway
User Manual
Configuration
and
Setup
Figure 4.3 Pop
-
up Window of Network Setting
You may proceed then to change the IP address to avoid any IP address conflict with other hosts on your LAN or
to connect the device to your existing LAN as shown in Figure 4.3
The system will prompt you for a credential to
authorize the changes
.
It will ask you for the
Username
and the
Password
.
The default username is
“
admin
”
, while
the default password “
default
”
.
After clicking on the
Authorize
button, a notification window will pop
-
up as shown
and some device may be restarted
.
After the device is restarted
(
for some model
)
, it will beep twice to
indicate that the unit is running normally
.
Then, the Modbus Gateway can be found on a new IP address
.
It may be
listed automatically by the
Device Management Utility©
or it can be found by clicking on the
“
Rescan
”
icon
.
Figure 4.4 Pop
-
up Notification Window after Authorization
Please consult your system administrator if you do not know your network
’
s subnet mask and gateway address
.
