Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
126
of
223
Figure 2.102 Webpage to Configure Each Port Tag Remarking of QoS
Table 2.91 Descriptions for Port Tag Remarking Configuration of Mode
Label
Description
Mode
Controls the tag remarking mode for this port.
Classified
Use classified PCP/DEI values.
Default
Use default PCP/DEI values
Mapped
Use mapped versions of CoS and DPL.
PCP/DEI
Configuration
Controls the default PCP and DEI values used when the mode is set to
Default
.
(CoS, DPL) to (PCP,
DEI) Mapping
Controls the mapping of the classified (CoS, DPL) to (PCP, DEI) values when the mode is set
to
Mapped
.
2.14.7
Port DSCP
The Port DSCP webpage allows the user to configure the basic Quality of Server (QoS) Port Differentiated Service Code
Point (DSCP) Configuration settings for all switch ports. The QoS Port DSCP Configuration table is shown in Figure 2.103.
The user can change the setting of either or both ingress or egress traffic. Table 2.92 explains the options for each port in
QoS Port DSCP Configuration.
Figure 2.103 Webpage to Configure Port DSCP of QoS
Table 2.92 Descriptions of Port DSCP Configuration of QoS
Label
Description
Factory
Default
Port
The Port column shows the list of ports for which you can configure DSCP ingress
and egress settings.
-
Ingress Translate
In Ingress settings you can change ingress translation and classification settings for
individual ports. There are two configuration parameters available in Ingress:
1. Translate: To Enable the Ingress Translation click the checkbox.
Unchecked
Classify
2. Classify: Classification for a port have 4 different values.
•
Disable
: No Ingress DSCP Classification.
Disable
