Industrial Managed
Ethernet Switch
User Manual
錯誤
!
使用
[
常用
]
索
引標籤將
Heading
1,Product Manual
套用到您想要在此處
顯示的文字。
Page
43
of
191
12. Modbus Poll will get the values 0x0A, 0x00, 0x32, 0x01, which means that the switch
’s IP is 10
.
0
.
50
.
1 as
shown in Figure 2.43.
Write Registers (This example shows how to clear the switch
’s Port Count
(Statistics).)
Figure 2.44 Mapping Table of Modbus Address for Clearing Port Statistics
1. Check the switch
’s Port TX/RX counts in
Port Statistics
page (described in Section 2.5.4
as shown in
Figure 2.45 Port Count in Port Statistics Webpage
2. Click function
06
on the toolbar as shown in Figure 2.46.
Figure 2.46 Click on Function 06 in the Modbus Poll
3. Set
Address
to 256 and
Value (HEX)
to 1 as shown in Figure 2.47, then click
“
Send
” button.