Industrial Managed
Ethernet Switch
User Manual
錯誤
!
使用
[
常用
]
索
引標籤將
Heading
1,Product Manual
套用到您想要在此處
顯示的文字。
Page
171
of
191
4
Configuring with a Telnet Console
An alternative configuration method is the Telnet method and it is described in this chapter
.
4.1 Telnet
Telnet is a remote terminal software to login to any remote telnet servers
.
It is typically installed in most of the
operating systems
.
In order to use it, users open a command line terminal
)
e
.
g
.
, cmd
.
exe for Windows Operating
System
(.
Note that only users with administrator (admin) access right as configured in Section 2.3.1 can use telnet
to login to the device.
4.2 Telnet Log
-
in
After the command line terminal is opened, type in
“
telnet 10
.
0
.
50
.
1
”
as shown in Figure 4.1
Note that telnet
command needs to follow by IP address or domain name
.
In this example, the default IP address is 10
.
0
.
50
.
1
.
If
users change the switch IP address, the IP address to log
-
in should be changed to match the new switch IP address
.
Figure 4.1 Telnet Command
4.3 Command Line Interface for Telnet
After input the telnet command line, the switch
’s interface is displayed as shown in Figure 4.2